Scame 205.W36-D0 - WALLBOX BE-W RFID T2 SOCKET 22KW 380V

Scame 205.W36-D0 - WALLBOX BE-W RFID T2 SOCKET 22KW 380V

WALLBOX BE-W

The Wallbox BE-W by Scame is a charging station for electric vehicles and plug-in hybrid vehicles particularly suitable for charging in the home / condominium. With an attractive and compact design it is made with a special technopolymer very resistant to UVA rays.

WALL BOX in the PERSONAL-RFID version, compliant with "MODE 3" of the international standard IEC / EN 61851-1, is a charging station suitable for wall installation, in public or private environments with public access.
Ideal for installation in private environments but open to third parties, such as: condominium parking spaces, hotels, restaurants, company parking lots, private parking lots, and in general all places that require access management, as the use it is not normally limited to the exclusive use of the vehicle owners themselves, but to a greater number of users.
The Wall Box BE-W in PERSONAL-RFID mode has a standard LCD display thanks to which it is also possible to view both instant and total consumption and user recognition with RFID card.
It is available in various versions: «tethered» or with integrated cable, with or without protections on board, with energy meter, with type 2 socket or type 3A socket, with "DC Leakage" device.
Personal / RFID stations can provide for the access of multiple users through the management of different identification cards that can be managed through a special programmer.
The BASIC-FREE versions can be connected as "SLAVE" with respect to a network system governed by a "MASTER" station (WEB-NET versions).

POWER
- 22KW three-phase

SOCKET
- 1xT2

ACCESSORIES INCLUDED
- DC Leakage
- Energy Meter
- Display
- RFID card reader

EQUIPMENT EXCLUDED
- Protection of the upstream line by the installer.

WALLBOX SOCKET T2

Charging station suitable for wall installation in private environments. It is ideal for installation in domestic environments such as: garages, private parking spaces that do not require access control as use is normally limited to a few people, almost always for the exclusive use of the vehicle owners themselves.

Wall Box in halogen-free technopolymer, for wall mounting, equipped with a Type 2 socket, equipped with a safety shutter in compliance with the IEC / EN 62196-2 standard.
Suitable for recharging electric vehicles in "mode 3" in compliance with the EN61851-1 standard.
Sophisticated design with «dual Feel Sensitive» finish, very resistant to UVA rays, high degree of protection against dust and water IP54 with the possibility of customization.

TECHNICAL FEATURES
- Rated current: 32A
- Rated voltage: 380V AC
- Frequency: 50-60Hz
- Insulation voltage: 400V
- Degree of protection: IP54
- Active parts protection: IPXXD
- Ambient operating temperature: -25 ° C + 40 ° C
- Material: Technopolymer
- Glow Wire test: 650 ° C
- IK degree at 20 ° C: IK08
- Color: Anthracite
- Mounting: wall / galvanized pole / totem
- Saline solution: Resistant
- UV rays: Resistant

STANDARD EQUIPMENT
- Rated current which can be reduced by means of a regulator on the internal board
- Status LED
- RFID protocol: Mifare Classic and Mifare Plus (if present)
- OCPP protocol (for WEB / NET versions)
- Connector release in case of blackout
- Child Safety Shutters

REFERENCE STANDARDS
- IEC 61439-7 (2018)
- EN IEC 61851-1 (2019)
- DIRECTIVE LOW VOLTAGE 2014/35 / UE
- DIRECTIVE EMC 2014/30 / UE