Scame 205.W73-D0 - WALLBOX BE-W WEB-NET T2 SOCKET 22KW 380V

Scame 205.W73-D0 - WALLBOX BE-W WEB-NET T2 SOCKET 22KW 380V

WALLBOX BE-W

The Wallbox BE-W by Scame is a charging station for electric vehicles and plug-in hybrid vehicles particularly suitable for charging in the home / condominium. With an attractive and compact design it is made with a special technopolymer very resistant to UVA rays.

The WALL BOX in the WEB-NET version, compliant with "MODE 3" of the international standard IEC / EN 61851-1, is an ideal charging station for wall installation made for installation in both public and private environments.
This version is also particularly suitable for domestic applications as with the WiFi versions you can control the transactions of your Wall Box with your smartphone.
For users, thanks to the web interface via app, it is possible to manage recharge operations via smartphone.
The device works within 10m without additional accessory devices, but not only that, in the case of domestic applications it can be connected to the home WiFi network and extend control via smartphone to the entire area covered by the network.
The Net-WEB versions are set up for the «MASTER» function to manage systems made up of several stations.
In fact, access to the station can be limited only to users enabled by the recognition system, which can be managed both locally and remotely through LAN and / or WiFi connections.
The WEB-NET versions can also manage «LOAD BALANCING» functions in order to distribute the available energy according to the cars connected to the various recharging stations connected to the network.

POWER
- 22KW three-phase

SOCKET
- 1xT2

ACCESSORIES INCLUDED
- DC Leakage
- Energy Meter
- Display
- RFID card reader
- LAN connection for monitoring

EQUIPMENT EXCLUDED
- Protection of the upstream line by the installer.

WALLBOX SOCKET T2

Charging station suitable for wall installation in private environments. It is ideal for installation in domestic environments such as: garages, private parking spaces that do not require access control as use is normally limited to a few people, almost always for the exclusive use of the vehicle owners themselves.

Wall Box in halogen-free technopolymer, for wall mounting, equipped with a Type 2 socket, equipped with a safety shutter in compliance with the IEC / EN 62196-2 standard.
Suitable for recharging electric vehicles in "mode 3" in compliance with the EN61851-1 standard.
Sophisticated design with «dual Feel Sensitive» finish, very resistant to UVA rays, high degree of protection against dust and water IP54 with the possibility of customization.

TECHNICAL FEATURES
- Rated current: 32A
- Rated voltage: 380V AC
- Frequency: 50-60Hz
- Insulation voltage: 400V
- Degree of protection: IP54
- Active parts protection: IPXXD
- Ambient operating temperature: -25 ° C + 40 ° C
- Material: Technopolymer
- Glow Wire test: 650 ° C
- IK degree at 20 ° C: IK08
- Color: Anthracite
- Mounting: wall / galvanized pole / totem
- Saline solution: Resistant
- UV rays: Resistant

STANDARD EQUIPMENT
- Rated current which can be reduced by means of a regulator on the internal board
- Status LED
- RFID protocol: Mifare Classic and Mifare Plus (if present)
- OCPP protocol (for WEB / NET versions)
- Connector release in case of blackout
- Child Safety Shutters

REFERENCE STANDARDS
- IEC 61439-7 (2018)
- EN IEC 61851-1 (2019)
- DIRECTIVE LOW VOLTAGE 2014/35 / UE
- DIRECTIVE EMC 2014/30 / UE