CPR cable FROR16 8x0.75mm2

CPR cable FROR16 8x0.75mm2

External diameter: 8 mm

FROR16

Construction features
Core: Flexible red copper conductor, class 5
Insulation: Compound based on PVC, quality R2
Stranding: Cores twisted / stranded in concentric crowns
Outer sheath: PVC-based compound, R16 quality
Colors: Gray (based on RAL 7035)

Electrical characteristics
Core operating voltage:
• 300 / 500V section ≤ 0.75 mm2
• 450 / 750V section ≥ 1.00 mm2
Sheath operating voltage: 450 / 750V
Test voltage:
• 2000V section ≤0.75 mm2
• 2500V section ≥ 1.00 mm

Normative reference
CEI 20-29 IEC 60228
CEI 20-11 EN 50363
CEI 20-22 IICEI EN 60332-3-24 Cat.C IEC 60332-3-24 Cat.C
CEI UNEL 36762

FIRE REACTION CLASS
N 50575: 2016 Cca - s3, d0, a3

Temperatures
Minimum operating temperature: -15 ° C
Maximum working temperature: + 70 ° C
Maximum short circuit temperature: + 160 ° C

Applications
Cable compliant with the requirements of the Construction Products Regulation (CPR UE 305/11), with the aim of limiting the production and spread of fire and smoke. Multi-core cable for control, signaling, command and measurement systems. The non-propagation characteristics of the fire and the small external dimensions make it particularly suitable for intercom systems. This cable can always be installed in coexistence with 450 / 750V power cables and also, if used to power category 0 systems (rated voltage less than or equal to 50V, if with alternating current, or at 120V, if with direct or non-corrugated current) , it can also be installed in coexistence with 0.6 / 1kV power cables that supply loads with a nominal voltage of 230 / 400V. All this does not exclude possible problems due to any electromagnetic interference. Underground installation is not allowed, even if protected.