BTicino KM4441 - Thermostat sand electronic heating / conditioning

BTicino KM4441 - Thermostat sand electronic heating / conditioning

Electronic ambient thermostat - relay output with 1 potential-free deviation contact 5 (2) A. - power supply 230 Va.c. - 2 modules, Sand

Stand-alone 2-module thermostat that registers the room temperature and allows it to be adjusted. It controls the temperature by means of an electronic sensor which controls an output relay with 1 potential-free deviation contact 5 (2) A. The antifreeze temperature can be adjusted and it is automatically activated once the device is switched off.

On the front of the device there are:
- the - and + controls for adjusting the selected temperature;
- the command to turn on/off;
- temperature/status display (in stand-by the brightness is automatically reduced)

Power supply: 110 – 240 Vac , 50/60Hz
Power consumption: 2W max
Maximum cable section: 1 x 1.5mm2
Operating temperatures: 0 - 40 °C
Temperature setpoint: 3 – 40 °C; 0.5°C increments
Drive type: 1BU
Pollution degree: 2
Rated impulse voltage: 4 kV