Tenda A18 - Home Wireless Extender AC1200

Tenda A18 - Home Wireless Extender AC1200

The A18 is a dual-band AC1200 WiFi repeater dedicated to those who want to enjoy the power of connectivity in every corner of their home. It offers up to 300 Mbps data rate on 11n band and 867 Mbps data rate on 11ac band. With two external omni-directional antennas, the A18 is able to provide wider WiFi coverage as well as extremely high data rates, guaranteeing 1080P HD streaming quality, mass multiplayer gaming and high-speed downloads. It only takes three simple steps to set up the range extender. Thanks to its powerful performance, the A18 is the top-of-the-range range extender from Tenda.

Range Extender WiFi Dual Band AC1200

Coupled with an optical router it can get everywhere thanks to the 5G GHz frequency

Ordinary AC1100 speed routers do not guarantee signal strength over every obstacle, e.g. over thick walls. With the Tenda A18 Range Extender to extend your WiFi network, the speed can reach up to 867 Mbps. Working on the 5 GHz band, the A18 gives you a fast, secure and smooth Internet experience.

Individualisation of the best signal Reliable and Fast Internet Experience

A18 can identify the best band on which to filter the signal, the 2.4 GHz and the 5 GHz. So you will always have your devices online even if you move from one floor of your house to another


The LEDs will guide you to the best location

If the LED lights up blue it means that the connection signal is good, otherwise it will be red. It will then be very easy to see where to install the A18 range extender


SMART CONFIGURATION

Simple and practical. You can configure your A18 extender via smartphone or tablet

01. Connect your device to the A18 SSID network.
02. Start your browser, type re.tent.cn in the address bar and set the password (optional)
03. Select the WiFi network to be extended then enter the password. The configuration is finished


Compact and elegant

Compact and small in size your A18 extender will not struggle to fit into your living room.

Also a 100 Mbps LAN port for an exaggerated extension!

Do you want to connect a Smart TV to enjoy maximum bandwidth!

With an Ethernet cable you can connect the A18 to your SMART TV to enjoy your favourite programmes and streaming without any interruptions.

Other features


Hide SSID, Extend your WiFi network with the WPS button, Mix WPA/WPA2 modes

Technical features


Port: 1*10/100 Mbps RJ45
Button: Reset, WPS
LEDs: 1 x Signal LED - 1 x WPS LED - 1 x Power LED
Power source: 9V 0.8A, built-in
Plug Type: National Standard, US Standard, European Standard, UK Standard, Brazil Standard
Power Consumption: No-load: 2.8W, Full-load: 5.2W
Dimensions: 80mm x 58mm x 48mm
Standards and Protocol:
IEEE 802.11a, IEEE 802.11n, and IEEE 802.11ac wave2 on 5 GHz
IEEE 802.11b, IEEE 802.11g, and IEEE 802.11n on 2.4 GHz
Efficiency: 802.11b: 11 Mbps - 802.11g: 54 Mbps - 802.11n: 300 Mbps - 802.11ac: 867 Mbps
Frequency range: 11n: 2.412-2.484 GHz - 11ac: 5.15-5.25 GHz
Transmit power: 2.4 GHz: 16dBm - 5 GHz: 12dBm
RSSI:
2.4 GHz
11b-1M:-97dBm
11g-54M:-76dBm
11n-20M-MCS7:-74dBm
11n-40M-MCS7:-72dBm
5 GHz:
11a-6M:-95dBm
11n-20M-MCS7:-74dBm
11n-40M-MCS7:-72dBm
11ac-80M-MCS9:-63dBm
Antenna: 2 * External 2dBi dual-band omni-directional antenna (non-detachable)
Channel: 11n: 20/40MHz by default - 11ac: 80MHz by default
Operating modes: Repeater Mode - AP Mode
Wireless security: Default encryption mode: Mix WPA-PSK/WPA2-PSK - WPA algorithm: TKIP
DHCP server: Supported
System elements: Firmware upgrade, Restore factory settings, Login password, and Reboot
Temperature:
Operating temperature:0ºC~40ºC
Storage temperature:-40ºC~70℃
Humidity:
Operating humidity:(10 - 90)%RH, non-condensing
Storage temperature:5%~90%RH, non-condensing.