FAAC 790077 - E045S Electronic board for swing automations 230V

FAAC 790077 - E045S Electronic board for 230V swing automations

The E045S can control one or two operators.
Thanks to the new 2easy and OMNIdec technologies, it is compatible with the XF 433/XF 868 quick-connect module (connector-ready), external receivers and the XP 15B and XP 20B D photocells (BUS connection).
The XIB BUS interface is provided for connecting conventional photocells.

Mains voltage: 220-240V~ 50/60 Hz
Max. power: 4W Stand by W
Max. motor power: 800W
Max. accessory load: 500 mA 24V - 500 mA BUS 2easy
Max electric lock load: FAAC lock (12V~ - 24V
Programming: LED display and buttons, via Simply Connect connectivity devices
Status indication: Display and LEDs
Inputs in terminal block: Open, Open pedestrian door, Stop (closed), BUS 2easy, Power + Earth
Outputs in terminal block: Blinker, Motors, 24V accessory power supply
Quick connector: XF 433/868 module for OmniDEC decoding, USB-A and Simply Connect
Protection fuses: 1 (2.5A)
Ambient operating temperature: -20°C to +55°C
Operating logics: Semi-automatic, Automatic, Semi-automatic Step-by-Step, Automatic Step-by-Step Safety, Semi-automatic B, Man Present C
Pause time: Programmable (0 to 9 min 50 sec)
Number of motors: Selectable (1 or 2)
Motor force adjustment: 50 levels per motor independently
Encoder use: Selectable
Closing sash delay time: Programmable (0 to 1 min 30 sec)
BUS 2easy device registration: Selectable
Motor drive: 1 and 2 (independently)
Working time learning: Simple self-learning (max. 4 min 10 sec).
Self-learning of working and slow-down times of the two leaves through one complete working cycle) With SAFEcoder absolute encoder the open/close/reverse positions are learnt
Advanced programming: Reversing strike and water hammer Selectable (to facilitate release and engagement of the electric lock)
Opening sash delay: Selectable
Sash slowdown 1: Programmable, percentage of total stroke (from 0% to 99%)
Sash 2 slowdown: Programmable, percentage of total stroke (from 0% to 99%)
Anti-crushing sensitivity: Programmable if ENCODER present (10 levels)
Stop angle search: Selectable if ENCODER present
File management via USB-A: Uploading board software
Uploading board configuration: Selectable
Upload radio code list: Selectable
Download configuration from card: Selectable
Download radio codes from card: Selectable


Simply Connect

The Simply Connect quick connector allows the use of connectivity devices that enable remote programming and management via web and/or app of all automations connected to the Simply Connect cloud platform: diagnosis, fault checking, remote intervention and organisation of your business.

IMPORTANT: the E045S electronic board is only compatible with the XF 433/XF 868 receiver (connector predisposition) and with XP 20B D photocells (BUS connection). For the connection of traditional photocells the BUS XIB interface is provided.