DESCRIPTION
BTicino GUPACC - Kit Green UP Access 3,7kW - Reinforced Schuko socket 090472 +
Recharging kits for residential use. Enables the creation of an infrastructure for charging electric and hybrid vehicles in mode 2 (or mode 1) using charging cables. Power supply directly from the switchboard: 1 dedicated line 3x2.5 mm2, protected with a circuit breaker (one line per socket).
The kit contains:
1 Green'up Access plastic socket, with closing flap, IP 66 - IK 08 - 25 kW / h - 230 V - 8h, 6 mm2 with screw terminals, according to IEC 60884-1, NF C 61-314,VDE 620-1 (German standard),
1 base for hanging the vehicle charging cable,
1 16A differential circuit breaker, curve C, 30 mA, type F (art. GN8813F16).
We recommend the use of a surge protection device (art. F10AP2). Recommended installation height: between 0.80 and 1.20 m from the floor
3.2 kVA sockets, modes 1 and 2, 2P + T, 16 A, 230 V, German standard with safety shutter.
- Used for safe charging of electric vehicles in mode 1 and mode 2 (via domestic mains socket).
- 2 P + T socket certified for all electric vehicles (mode 1 and mode 2), cost-effective and safe. Equipped with optimised connection terminals, metal contacts with silver-plating surface treatment (5 microns). Equipped with the patented Green'up System.
- Patented Green'up System: The electric vehicle recognises the secure Green'up Access infrastructure and selects the maximum power that can be delivered via the socket (thus reducing
charging times).
- Suitable for use at home or in the workplace
This socket has been approved in exclusive tests for the charging of one electric vehicle only, so no other use is permitted (e.g. feeding
loads other than the vehicle itself). Any use other than that mentioned may cause extremely serious damage to the socket itself. Check that your electricity supply contract is compatible with charging the electric vehicle. Always disconnect the socket before starting the vehicle. VE (Electric Vehicle) sockets are only authorised for use with the cables supplied with the vehicles. Do not use extension cables or adapters. The EVSE box must be hung. The use of a surge arrester is recommended.
Technical characteristics
Impact resistance: IK 08
Penetration of solids/liquids: IP 66
UV resistance: no significant change in appearance when tested at 550 W/m2 lighting (colorimetric measurement according to laboratory)
duration 7 days.
Resistance to the following substances: - chlorine pH 10-11 - alkaline pH 9-10 - acid PH3
Resistance to salt: 7 days (168 hours).
Halogen-free materials.
Self-extinguishing: + 850°C / 30 s for insulating parts with live parts + 650°C / 30 s for other insulating parts
Storage and operating temperatures - 20°C to + 40°C
- Electric vehicle charging performance - 25 kWh (230 V/8 h
Safety instructions
This product must be installed in accordance with the installation rules and preferably by a qualified electrician. Improper installation and/or use may result in risk of electric shock or fire. Before installation, read the associated instructions carefully and find a suitable mounting location for the product. Do not open, disassemble, alter or modify the device except as specifically indicated in the manual. All Bticino products must only be opened and repaired by properly trained and authorised Bticino personnel. Any unauthorised opening or repair will result in the exclusion of any liability, replacement rights and warranties. Use only Bticino branded accessories.
Facebook
Twitter
Google 
Instagram
