ABB F3CAR230C230 - Automatic Reclosing Unit F3C-AR230 C 2/30 for F202 30mA

Ideal for applications where automatic resetting is essential but system integrity must be preserved.

Compatibility

⚠️ Warning – Limited and specific compatibility

• Compatible with:
  • ABB F202 RCCBs, 2-pole, 30mA, up to 100A
• Not compatible with:
  • F204 (4-pole)
  • 300mA devices
  • RCBOs or combined MCB/RCDs
  • RCCBs over 100A

System Monitoring and Reclosing Logic

Unlike traditional devices, this unit checks circuit insulation up to 24 hours after a trip. Reclosing logic is as follows:

• 1st attempt: after approx. 3 seconds
• 2nd attempt: after 2 minutes
• 3rd attempt: after 5 minutes
• 4th to 48th attempt: every 30 minutes
• Max attempts: 48
• Wait between attempts: 45 seconds
• Min impedance to block reclosing (Rd0): 8 kΩ
• Min impedance to allow reclosing (Rd): 22 kΩ

If a fault persists, reclosing is blocked.

Main Features

• Model: F3C-AR230 C 2/30
• ABB Code: 2CSF201998R0035
• EAN: 8012542539759
• Series: F3C-AR230 C
• DIN modules: 1.5
• Mounting: DIN rail, on right side of RCCB
• Standard: IEC/EN 63024

Electrical Specifications

• Nominal voltage: 230–240 V AC
• Input voltage type: AC
• Power consumption (active): <26 VA
• Standby consumption: <1.5 VA
• Overvoltage category: III
• Pollution degree: 2

Mechanical Characteristics and Connections

• Opening/closing time: <1 second
• Plug-in terminals
• Wire section: 0.2–2.5 mm²
• Stripping length: 5 mm
• Tightening torque: 0.4 N·m
• Locked state contact: available (terminal 3)
• Mechanical endurance: 20,000 cycles

Environmental Data and Protection

• Operating temperature: -25 … +60 °C
• Protection rating: IP40 (enclosure) / IP20 (terminals)
• Shock resistance: 25g (2 shocks, 13 ms)
• Vibration resistance: 1g (5–150–5 Hz, 20 cycles)
• Tested conditions: 28 humidity cycles at 55°C/90-96% and 25°C/95-100%

Dimensions and Packaging

• Width: 81.5 mm
• Height: 104.15 mm
• Depth: 58.3 mm
• Net weight: 130 g
• Package contents: 1 unit
• Gross weight: 0.150 kg

Compliance and Certifications

• RoHS: Compliant with Directive 2011/65/EU + Amendment 2015/863
• REACH: Free from substances >0.1%
• CMRT (Conflict Minerals): Available
• WEEE: Category 5 – Small equipment
• ETIM classification: EC001286

Safety and Warnings

• Installation must be carried out only by qualified personnel.
• Remote activation may cause:
  • Unexpected start-up of equipment
  • Voltage restoration in faulty circuits
• In case of frequent tripping, do not force automatic reclosing: a technical check is required.

Why choose ABB F3CAR230C230?

• Automatic safety check up to 24 hours before reclosing
• Up to 48 progressive attempts with increasing intervals
• Advanced protection for sensitive systems and critical environments
• Plug & play, easy to install, with front LED indicator
• Guaranteed compatibility with F202 30mA up to 100A