Perry 1IO 0022WIFI ​​- Multifunction Wi-Fi Time Switch with 2-DIN Hotspot

Perry 1IO0022WIFI - Multifunction Wi-Fi Time Switch with 2-DIN Hotspot

The Perry 1IO0022WIFI Wi-Fi time switch is a multifunction device designed for automatic management of electrical loads in residential, commercial and industrial installations. It allows programming, control and parameter modification through the Perry Home app for iOS and Android smartphones and tablets, both locally using the integrated hotspot and remotely through an internet connection. The app can manage an unlimited number of devices and provides historical logs to optimize programs and operating times.

Technical Specifications

Type: Multifunction Wi-Fi time switch
Installation: DIN rail or back-panel mounting - 2 DIN modules
Supply voltage: 230 V AC +/-10% 50 Hz
Contact rating: 16(2) A 250 V AC
Maximum number of programs: 45 (ON + OFF)
Minimum ON/OFF time: 1 second
Power reserve: 72 hours
Time accuracy: +/-1 second/day
Output: Relay with changeover contact
Protection rating: IP20 - IP40 back-panel mounting
Insulation class: II
Terminal type: Captive screw
Maximum cable cross-section: 1 to 6 mm2
Operating temperature: -20 C to +55 C
Housing: Thermoplastic, gray RAL 7035
Wi-Fi: 2.4 GHz
Dimensions (W x D x H): 35 x 60 x 90 mm

Load ratings

Incandescent and halogen lamps: 3000 W
Uncompensated fluorescent lamps: 1100 W
Parallel compensated fluorescent lamps: 900 W (125 uF)
CFL lamps: 7 to 23 W (maximum 23 lamps)
LED lamps: maximum 25 x 4 W, 12 x 8 W or 8 x 15 W

Functions and operating modes

The device supports ON/OFF, cyclic, random, countdown and holiday programs. It can operate in Access Point mode for direct programming without an internet connection or in Station mode for remote control through a Wi-Fi router. Programs continue running even without an internet connection. An AUX input is available for manual remote control using an external push button or switch.

Design and functionality

Designed for long-term reliability and precision, the Perry 1IO0022WIFI includes front LED status indicators, manual controls, automatic daylight saving time adjustment and full management through the app for maximum flexibility in electrical automation.

Real-world requirements

2.4 GHz Wi-Fi only. 5 GHz is not supported.
With dual-band routers, separate SSIDs are recommended.
Initial setup must be performed from a smartphone connected to the 2.4 GHz Wi-Fi network.
If this step is skipped, the device may appear faulty even though it is working correctly.

Two Wi-Fi operating modes

1. AP Mode (Direct Hotspot)

The Perry creates its own Wi-Fi network.
The smartphone connects directly to the device.
No internet connection is required.
Typical range is about 15 to 20 meters.
Time must be synchronized manually from the app.

2. STA Mode (Router + Cloud)

The Perry connects to your home Wi-Fi router.
Remote control is available from anywhere through the internet.
Time synchronization is automatic.
The device can be shared with other users.

Important

Even if the internet connection or cloud service is unavailable, all programmed schedules continue to operate because they are stored directly inside the device.