Tecnel SYN110PE - Dimmer for Single-Color LED Strips 12/24/36/48V DC 10A with Memory and Multi-Command PWM Technology

Tecnel SYN110PE - Dimmer for Single-Color LED Strips 12/24/36/48V DC 10A with Memory and Multi-Command PWM Technology

The TECNEL SYN110PE dimmer is a multifunction electronic device designed to adjust the brightness of single-color LED strips powered by 12, 24, 36, and 48V DC, with a maximum current of 10A and a power output of up to 480W.

Thanks to digital PWM technology and the Multi-Command function, it allows you to control the brightness of LED strips using various control types: digital encoder, PUSH buttons, 0/1-10V DC signal, 5KΩ potentiometer, PWM signal, and MASTER/SLAVE synchronization.

The option of operating in Master, synchronized Multi-Master, or Master/Slave mode allows you to create even complex lighting systems, with control from multiple points and the possibility of expanding the number of LED strips managed.

Equipped with an operating memory and status memory, it maintains the set brightness level even after switching off and then restoring power, ensuring convenient and personalized use.

Main Features:

Dimmer for single-color LED strips 12/24/36/48VDC
Maximum current: 10A
Maximum manageable power:

120W at 12VDC

240W at 24VDC

360W at 36VDC

480W at 48VDC

Digital PWM control technology
6 selectable control modes:

Digital encoder

PUSH buttons

Active or passive 0/1-10VDC signal

5KΩ potentiometer

PWM signal

Open collector PWM signal

Operation memory to maintain the last brightness level set
Status memory in the event of power failure and restoration
MASTER, MULTI MASTER, and MASTER/SLAVE functions
Synchronization via SYN signal up to 200 meters
IP20 protection

Technical features Adjustment:

Brightness can be programmed to ramp up and down, automatically searching for the minimum and maximum values.

A ramp function adjustable from 1 to 20 seconds for gradual on and off, ideal for decorative effects, ambient lighting, and scenic installations.

Minimum brightness can be adjusted via a dedicated trimmer from 0% to 20% to eliminate any LED flickering.

Technical specifications:

Supply voltage: 12/24/36/48V DC
Maximum current: 10A
Technology: PWM
Control: Buttons, Encoder, 0/1-10V DC, Potentiometer, PWM, MASTER/SLAVE
Connection type: Terminals
Dimensions: 47 x 42 x 20 mm
Protection rating: IP20

MASTER/SLAVE system:

The Master/Slave system allows you to synchronize multiple SYN110PE dimmers connected to each other, maintaining the same control and brightness level across all installed LED strips.

Communication between the units occurs via two dedicated wires, a common negative and the SYN digital signal, with the possibility of extending the connection up to 200 meters.

Dimmers configured as Slave automatically follow the settings of the Master dimmer, allowing you to expand the system while maintaining uniform control.

Electronic protection:

Protection against:

Power and load polarity reversal

No output load

Surge voltage above 48 VDC

Voltage below 12 VDC

Overload

Output short circuit with self-reset

SYN signal connection errors

Control signal polarity reversal

Applications:

Residential LED lighting
Decorative lighting
LED strips for commercial environments
Home automation installations
Architectural lighting
Lighting effects and scenography
Multi-point control lighting systems

The TECNEL SYN110PE represents a complete and versatile solution for the professional control of single-color LED strips, offering high control flexibility, settings memory, and the possibility of expansion via synchronized MASTER/SLAVE systems.