Specialcavi Baldassari FNZ10016G - CPR Cable FROR16 16G1mm²

Specialcavi Baldassari FNZ10016G - CPR Cable FROR16 16G1mm²

Outer diameter: 12.3 mm

FROR16

Constructional Characteristics

Core: Flexible red copper conductor, class 5

Insulation: PVC-based compound, R2 quality

Cord: Twisted/corded cores with concentric crowns

Outer jacket: PVC-based compound, R16 quality

Core colour: CEI UNEL 00722 - 00725 (HD 308 S2 - EN 50334)

Outer jacket colour: Grey (based on RAL 7035)

Electrical characteristics

Core operating voltage

- 300/500V cross section ≤ 0.75 mm²

- 450/750V section ≥ 1.00 mm²

Sheathing operating voltage: 450/750V

Test voltage

- 2000V section ≤ 0.75 mm²

- 2500V cross section ≥ 1.00 mm²

Normative reference

CEI 20-29 IEC 60228

CEI 20-11 EN 50363

CEI 20-22 II

CEI EN 60332-3-24 Cat.C IEC 60332-3-24 Cat.C

CEI UNEL 36762

FIRE REACTION CLASS

EN 50575:2016 Cca - s3, d0, a3

Temperatures

Minimum operating temperature: -15°C

Maximum operating temperature: +70°C

Maximum short-circuit temperature: +160°C

Laying conditions

Minimum laying temperature: 0°C

Minimum laying radius: 8×D

Maximum pulling force: 50N per mm² of total copper cross-section

Fixed laying, in pipe or duct in air

In free air

Applications

Cable complying with the requirements of the Construction Products Regulation (CPR EU 305/11), with the aim of limiting the production and spread of fire and smoke.

Multi-core cable for control, signalling, command and measurement installations. The non-fire propagation characteristics and small external dimensions make it particularly suitable for intercom and switchboard applications.

This cable can always be installed in coexistence with 450/750V energy cables and furthermore, if used to supply category 0 systems (rated voltage less than or equal to 50V, if alternating current, or 120V, if direct current or not corrugated), it can also be installed in coexistence with 0.6/1kV energy cables supplying loads with a rated voltage of 230/400V.

This does not exclude possible problems due to electromagnetic interference.

Underground installation, even if protected, is not permitted.